网 址 ：www.pn-yq.com
地 址 ：贵州省毕节市七星关区碧阳街道居然之家斜对面诚达益防腐木
How to choose the material of Guiyang anticorrosion wooden pavilion
For many years the procurement Guiyang wood preservative experience tells me that the construction of wooden gazebo brand is not the most important, but the quality of Guiyang wooden gazebo, wood or technology worth mentioning, but to use the finest, and a raw material, workmanship disposal technology, these must know what to see quality. It's not a good thing to buy.
So, how do the wooden gazebo? Do wooden pavilion first choice of raw materials, now there are many, there are south pine, Pinus sylvestris, Finnan wood, red pine, Pinus radiata and so on many wooden gazebo! Do is demand experienced master was done, and this should be done before you get the designer understand the scanning drawing to you, drawing to layout, each layout inside the scale data standard for the description should be reasonable, to meet the principle of balance of power, because the wood to take into account the force of doubt, such as drawing a good description, are you looking for the master the construction site.
865棋牌APP1, the wild wood should be dried in the field to roughly the same degree of humidity and the external environment construction。 The use of large amount of water in the wood construction device will show greater deformation and cracking。
2. In the construction site, the antiseptic wood should be ventilated and stored, and the sun should be prevented as much as possible.
3, at the construction site, the existing scale of anticorrosive wood should be used as far as possible. If on-site processing is needed, the corresponding preservatives should be applied, and all the cut-off and holes shall be fully painted to ensure the service life of the anticorrosive wood.
4, when setting up the platform, we should try to use the long wood to cut the joint in order to be beautiful。 The 5mm-10mm gap is left between the surface of the plate。
5, all connections should be galvanized joints or stainless steel connectors and hardware products, in order to resist corrosion, and must not use different metal parts, otherwise it will rust soon, so that the layout of wood products will be damaged.
6, in the process of production and perforation, should be the first to use electric drill drilling and fixed with screws, to avoid the formation of artificial crack。
7, although after the disposal of wood can be bacteria, mildew corrosion and termites, but we still recommend that you in after the completion of the project, the wood dry or dried in its appearance on the use of wood protective paint brushing。 In the field of field wood special paint, we should pay more attention to shake well first, it needs 24 hours of sunny conditions after finishing, so that the coating will be film on the wood surface。