865棋牌APP

毕节防腐木厂家

新闻分类

联系我们

毕节诚达益贸易865棋牌APP

朱先生 :18146296555

吴先生 :15882283337

网 址 :www。bjcdyffm。com

地 址 :贵州省毕节市七星关区碧阳街道居然之家斜对面诚达益防腐木


技术知识

您的当前位置: 贵州防腐木厂家 >> 865棋牌APP >> 技术知识

你知道如何防止贵阳防腐木​木质开裂吗?

发布日期:2018-01-12 作者:贵阳防腐木 点击:

你知道如何防止贵阳防腐木木质开裂吗?

贵阳防腐木

Do you know how to prevent the dehiscence of wood from Guiyang's wood preservative wood?

     随着社会的不断发展,现在的广州防腐木已经进入人们的视界,在户外阳台,公园等地广泛应用,但是有些顾客发现防腐木在运用一段时间就会出现开裂的现象,这跟装置是否规范有着极大的联系。怎么正确装置才能避免广州防腐木开裂呢?

With the continuous development of society, Guangzhou wood preservative has now entered people's vision, is widely used in outdoor balcony, parks and other places, but some customers found wood preservative cracking phenomenon in the use of a period of time, with this device whether the specification has a great connection。 How can the correct device avoid the cracking of Guangzhou anticorrosion wood?

1、在衔接时应预先钻孔,这样能够避免开裂,胶水则应是防水的。

1, in the connection should be pre - drilling, so that it can avoid cracking, glue should be waterproof.


2、 在施工中,我们要铭记它的注意事项,不要出现问题。假如可能的话,应该尽可能地运用现有的防腐木尺度及外形,对浸渍材所做的任何加工,如钻孔、精刨、削切等会使浸渍材的运用寿命缩短。这样能够削减木材开裂的可能性。厚度大于38MM的林方,为了避免其变形,可在其木芯一面的中心线上开一个宽10MM,深10MM的小槽。

2, in the construction, we must remember its attention, do not have problems。 If possible, the existing wood preservative scale and shape should be used as far as possible。 Any processing done by impregnated materials, such as drilling, finishing and cutting, will shorten the service life of impregnated wood。 This can reduce the possibility of wood cracking。 In order to avoid the deformation of 38MM, in order to avoid its deformation, a wide 10MM, deep 10MM slot can be opened on the center line of the wood core。


3、尽量运用二级以上的防腐木方,因为其含水率为20%以下,能够有效地避免开裂与变形。若一定要运用含水率大于20%的等级,则在施工现场,木方的叠放应做到每层有10-20MM的缝隙,并在施工前能放置于现场72小时以上,并在此期间防止阳光的直接照射。建议在施工顶用热镀锌及的钉子或螺丝做连接及安装。

3. Try to use more than two levels of anti-corrosion wood, because its water content is less than 20%, can effectively avoid cracking and deformation. If we must use the grade of moisture content greater than 20%, then we should have 10-20MM gaps on every floor at construction site, and put them on the scene for more than 72 hours before construction, and prevent direct sunlight exposure during this period.  Recommended connection and installation in construction work and hot galvanized nails or screws.


本文网址:http://www.pn-yq.com/news/446.html

相关标签:贵阳防腐木

最近浏览:

贵公网安备 52050202001223号

欢迎给我们留言
请在此输入留言内容,我们会尽快与您联系。
姓名
联系人
电话
座机/手机号码
邮箱
邮箱
地址
地址
幸运赛车 广东快乐十分APP下载 865棋牌 幸运赛车开奖直播 幸运赛车开奖直播 秒速快3 广西11选5官网 广西快乐十分软件下载 秒速快3 幸运赛车官方网站